SmartLevel SPS
Power supply units and stations
SPS24060G: 24 V, 1.5 A Power supply station with LCD display and RS485 BUS
The SPS24060G 24V, 1.5A power supply unit is designed for fire detection systems and features an LCD display for viewing the event log and detailed fault information, such as low battery, power failure, or ground faults. It features 3 individually protected outputs with a 4 A current limit, connectable to the RS485 bus of fire control panels (Smart Loop, Previda Micro).
It includes a 1.5 A switching module at 27.6 V, a compartment for two 12 V – 7 Ah batteries, and a compact design (325 x 325 x 80 mm, 3 kg without batteries).
SPS24060S: 24 V, 1.5A Power supply station with LED indicators and Inim loop connection capability
The SPS24060S is a 24 V / 1.5 A power station featuring LED status indicators and direct connection to the loop of INIM control panels, enabling automatic supervision by the panel. It provides fault and mains‑fault outputs, along with a single power output, and is suitable for both stand‑alone operation and system integration. The 1.5 A / 27.6 V switching module supports the installation of two 12 V / 7 Ah batteries. Dimensions: 325 x 325 x 80 mm. Weight: 3 kg (without batteries).
SPS24160G: 24 V, 4 A Power supply station with LCD display and RS485 connection capability
The SPS24160G is a 24V, 4A power supply designed to deliver high power and full control in fire protection systems. The built-in LCD display allows you to monitor faults, events, and current draw for each output. It offers three 4A-protected outputs and connects directly to the RS485 bus of the control panels (Smart Loop, Previda Micro).
Equipped with a 4 A switching module at 27.6 V, it supports two 12 V – 17 Ah batteries. Larger dimensions: 497 x 380 x 87 mm. Weight: 6 kg (without batteries).
SPS24160S: 24 V, 4 A Power supply module with LED indicators and Inim loop connection capability
The SPS24160S is the ideal solution for fire protection systems that require high power and loop connection to Inim control panels. With its 4 A output and LED status indicators, the station provides full supervision by the control panel, including fault signals, mains failure, and general fault conditions. It integrates a 4 A / 27.6 V switching module and supports the installation of two 12 V / 17 Ah batteries. Dimensions: 497 x 380 x 87 mm. Weight: 6 kg (without batteries).
Integration and further options
This product is available in the following versions
SPS24060G
Stand-alone power supply stations
SPS24160G
Stand-alone power supply stations
SPS24060S
Power-supply stations connectable to the loop
SPS24160S
Power-supply stations connectable to the loop
SPS24060SR
Power-supply stations connectable to the loop
SPS24160SR
Power-supply stations connectable to the loop
Technical specifications
| SPS24060G | SPS24060S | SPS24160G | SPS24160S | |
| Internal switching power-supply module | 1.5 A @ 27.6 V | 1.5 A @ 27.6 V | 4 A @ 27.6 V | 4 A @ 27.6 V |
| Input voltage | 230 V~ -15% +10%, 50-60 Hz | 230 V~ -15% +10%, 50-60 Hz | 230 V~ -15% +10%, 50-60 Hz | 230 V~ -15% +10%, 50-60 Hz |
| Maximum current draw from mains (230V~) | 0,5 A | 0,5 A | 1,1 A | 1,1 A |
| Output voltage | nominal 27.6 Vdc – range from 18 to 27.6 Vdc | nominal 27.6 Vdc – range from 18 to 27.6 Vdc | nominal 27.6 Vdc – range from 18 to 27.6 Vdc | nominal 27.6 Vdc – range from 18 to 27.6 Vdc |
| Stability | higher than 1% | higher than 1% | higher than 1% | higher than 1% |
| LCD | Yes | No | Yes | No |
| Ancillary power outputs, each short-circuit protected and 4 A current limited | 3 | 1 | 3 | 1 |
| Tamper/Fault signalling relay output | 1 | 2 | 1 | 2 |
| Built-in battery charger with battery supervision | Yes | Yes | Yes | Yes |
| Battery housing | 2 x 7 Ah 12 V | 2 x 7 Ah 12 V | 2 x 17 Ah 12 V | 2 x 17 Ah 12 V |
| Dimensions (HxWxD) | 322 x 324 x 86 | 322 x 324 x 86 | 497 x 380 x 97 | 497 x 380 x 97 |
| Weight (without battery) | 2.8 kg | 2.8 kg | 6 Kg | 6 Kg |
| Loop connection capability | No | Yes | No | Yes |
| RS485 BUS connection capability | Yes (SmartLoop, SmartLine and SmartLight control panels) | No | Yes (SmartLoop, SmartLine and SmartLight control panels) | No |
Download documentation
lock
keyboard_arrow_down Installation Manual - Materials (8)
keyboard_arrow_down Certificate of Analysis (CoA) - Materials (8)
keyboard_arrow_down Certificate of Performance (CoP) - Materials (10)
keyboard_arrow_down EU Declaration of Conformity - Materials (24)
keyboard_arrow_down (EU) Declaration of Performance - Materials (24)
Materials (90)
